YQK27-1000 single action H frame type hydraulic stamping machine
|FOB Price:||US $100-200 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $100-200/ Piece|
|Payment Terms:||L/C, T/T, D/P, Western Union, Paypal, Money Gram|
- Model NO.: YQK27-1000
- Feature: High Efficiency
- Condition: New
- Warranty: 18 Months
- Max.pressure ofliquid: 25MPa
- Cushion pressure: 4000kKN
- Daylight: 1600mm
- Transport Package: in Nude
- Origin: China
- Type: H frame type press
- Certification: SGS, ISO9001, CE
- Customized: Customized
- Rated pressure: 10000KN
- Stroke of slide: 1000mm
- Stroke of cushion: 350mm
- Trademark: HAVEN
- Specification: Customized
- HS Code: 8462
- Applications and Characteristics
The press has independent hydraulic and electric systems. Centralized button-control allows manual-operation and semi-auto operation.Besides, programmable controller (PLC) is used in the electric control system.
The pressing force and stroke can be easily adjusted by the operator.
- Main technical parameters.
|Force of hydraulic cushion||kN||1000||1600||2000||2000||2000||4000|
|Max. working pressure||MPa||25||25||25||25||25||25|
|Max. stroke of slide||mm||800||800||800||900||900||1000|
|Max.stroke of hydraulic cushion||mm||300||300||350||350||350||350|
|Max open height between slide and worktable||mm||1350||1350||1350||1500||1500||1600|
|Effective area |
|left to right||mm||1200||1200||1200||1500||3000||3000|
|front to back||mm||1000||1200||1200||1200||1600||2000|
|left to right||mm||800||800||800||1000||2200||2300|
|front to back||mm||600||800||800||800||1200||1800|
- General introduction
The main body consists of top beam, slide, tie rod, worktable, bolster, main cylinder, hydraulic cushion mechanism, hydraulic and electric system etc.
B. Top beam, slide and worktable are welded by steel Q235A of high quality. After welding, they will be annealed at a high temperature to remove the welding stress.
C. Pressing cylinder: The press has two cylinders to achieve the nominal force. The pistons are connected with the slide by flange. Their surface are quenched in intermediate frequency in order to make the rigidity of the surface up to 45HRC.The body is made of 45# steel. There is experiment to test the cylinder at 1.1 times working pressure. The sealing components which are of high quality will give a reliable and long time performance.
D. Rigid hydraulic cushion which is made of steel Q235A is inside the worktable. The cushion is driven by the knock-out cylinder which stroke can be adjusted. It is guided by four posts. There are small mats on the top surface of the cushion. When damaged, they can be replaced by new ones to give a good plane.
- Hydraulic system
B Main pump is axial plunger pump which has a constant power.
C Two-way integrated cartridge inserted valve is used to make the system steady, reliable.The valve has a less leaking and less malfunction.
D Pump station consists of oil tank, high pressure pump, electromotor, cartridge inserted valve, and etc.Enclosed oil tank which is welded by steel sheets is divided into two areas. Oil goes out from one area and returns back to the other area. The oil tank has an oil discharge plug and some windows. When need, it can be easily cleaned through the windows after the oil is discharged. When working, air outside the tank will be absorbed into the tank so that the pressure in the tank can keep balance with atmospheric pressure. Air cleaner on top of the tank can filtrate the air, and new clean oil flow into the tank through the cleaner. Oil filter is fixed at the oil suction to clean the oil, so that the pump and valve can give a long time service.
E Sealing of the system is reliable. Main oil pipelines are connected with flange. Measures are taken to reduce the tremor of pipelines such as astigmatic pipe clamp.
- Electrical system.
B Warning signals, limit switches and actions of the press are interlocking.
C Switches for choose operation mode and interrelated buttons are lay on a centralized control panel.
D The press has fixed button cabinet.
- Operation mode
2 The stroke of slide can be adjusted by limit switch.
3 All the actions of the press can achieve through the buttons on the control panel.Besides,buttons such as "both-hand","return","stop","emergency stop" are lay on the control panel.
2 There are limit switches for the slide.
3 Safety valve is used in the hydraulic system to protect the machine from overload.
4 Both hand operating button.
5 The hydraulic lock is fixed in the lower cavity of the piston cylinder to prevent the slide from slipping down.
- Working environment
2 Environment temperature:0-40C°.
- Main Components
|1.||Integrated cartridge inserted valve||Jining Taifeng Hydraulic Equipment Co.,Ltd|
|2.||Solenoid valve||Jining Taifeng Hydraulic Equipment Co.,Ltd|
|3||High pressure pump||Shanghai Shenfu high pressure pump factory or Qidong high pressure pump Co.,Ltd.|
|4||Electromotor||Shanghai Lichao Electric Motor Co.,Ltd|
|5||Position switch(no contact)||OMRON|
|7||Pressure gauge||Wuxi Pressure Gauge Factory|
|8||AC contactor||CHINT Group, Suzhou Machine Tool Electrical Equipment Co.,Ltd|
|10||Automatic air circuit breaker|
|13||Seal ring||Tianjin Rubber Factory or Jiangmen Zhejiang|
|15||Programmable controller||PLC( Mitsubishi)|
- Spare part
2 A set of foundation bolts and nuts.
3 Built for purpose tools.
- Technical data
1 Production specification.
2 Certificate of conformity
3 Packing list.